EasyRoads3D V3 Manual
 

 

Shortcuts, Hotkeys & Scene Operations


 

HOTKEYS

Scene

W Pressing the W key toggles between three orientation modes for the position handle for road markers and crossing objects: path forward, path forward horizontal orientation and global orientation
E Rotation handle for crossings, tilting control for selected road markers
CTRL + H Toggle On/Off the display of slider handles for side object start / end offsets and sideways distance. Note that start / end offset handles are only displayed when active for the selected marker (start offset handle when the first marker is selected or the previous marker is inactive, end offset handle when the last marker is selected or the next marker is inactive). The sideways distance slider handle will only be displayed when the Side Object has a Sideways Distance value on at least one of the markers and the respective sphere handle is selected in Scene View. These values can also be set in the Inspector
SHIFT + Click Instantiate the selected crossing / connection in the scene
F Zoom in to the selected road marker, or to the mouse position when no marker is selected. When a road is selected in the hierarchy the F key will switch the selection the road network object zoomed in to the center of this road. The nearest marker will be auto selected..
CTRL + Alt + Click Selects the clicked terrain as the active terrain when the middle mountain tab is active. Only this the terrain will be flattened when switching to Build Mode which can be useful to speed up the process time during testing. Clicking the same terrain once again will set the selection back to "All Terrains"
P This will connect a new instance of the last instantiated crossing object to the selected marker (first or last marker of a road)
O This will attach the next matching connection on the crossing prefab attached to the selected marker
J Activates / deactivates Global Grid Display (see general Settings > Scene Settings)
K Activates / deactivates Local Grid Display (see general Settings > Scene Settings)
CTRL + K Iterates through available Local Grids (see general Settings > Scene Settings)
CTRL + Space Toggles On/Off the display of the SceneView road, indent and surrounding highlight surfaces. This is useful to quickly get a clear view of the road and side objects without having to deactive these highlight surfaces in General Settings > Scene Settings
SHIFT + L Shortcut for: General Settings > Scene Settings > Exclude Locked Objects
SHIFT + V Toggles off / on drawing terrain tree and foliage similar to Terrain Object > Inspector > Terrain Settings > Tree & Detail Objects > Draw. Temporarily hiding trees and foliage can help visualize the road better in areas with dense vegetation.

 

Road Objects

SHIFT + Click Add Markers
SHIFT + Click Marker Select multiple markers
SHIFT + Z Select all markers of the selected road. When currently two markers are selected all markers between those two markers will be selected. Transofrm changes in the scene or Inspector changes will affect all selected markers.
CTRL + Click This will start a new marker from the selected marker (first or last), this is useful for sci fi type of roads, bridges, etc. where the marker should not snap to the ground
Mouse Down + CTRL + Drag Marker Road Network objects that generate Side Objects only will instantly update the side object(s) after marker changes. When complex side objects are involved CTRL + Drag can be used. The side object(s) will update when the mouse button is released. Be careful to first press the mouse button for the first and last marker otherwise the above CTRL + Click event will be triggered.
I Insert Markers
SHIFT + Click + Drag Snap the marker to the terrain height while moving the marker position
SHIFT + R Removes the selected marker or selected crossing prefab
SHIFT + U Disconnects the road from a connection when the selected marker is connected to a crossing prefab
SHIFT + J Joins two selected roads in one single road when the road types match. When only one road and marker is selected SHIFT + J will split the road in two roads
N Toggles On/Off road shape node selection for the selected marker. After selecting one of the shape nodes you can change the shape both in Scene View as in the Inspector. Holding Shift while moving the position handle will update all shape nodes on the outer side of the selected none
B Toggles On/Off side object node selection for the selected marker for Shape type of side objects. After selecting one of the shape nodes you can change the shape both in Scene View as in the Inspector. Holding Shift while moving the position handle will update all shape nodes on the outer side of the selected none
SHIFT + Drag Holding down the Shift key while moving a marker will keep the marker snapped to the terrain. When pressing the Shift key first the center of the gizmo changes to a flat square. This means the marker will move relative to the direction the Scene View Camera is facing. This generally works better when keeping the marker snapped to the terrain
SHIFT + A Shift + Click adds and selects a new marker, the position handle will be visible. This position handle may interfere with adding more markers nearby. Shift + A will hide the handle
CTRL + SHIFT + M Snap all markers to the terrain height at the specific marker position
CTRL + M Snap the selected road marker to the terrain height at that position
X Press the X key to position a marker of Road A below or above road B and avoid the roads snapping together. This is useful for maximum road shape control in bridge situations. Pressing the X key also prevents road markers from snapping together
Drag Y-axis This will show the height difference between the marker and the terrain when dragging the road marker position gizmo on the Y-axis.
Keypad Plus Selects the next marker
Keypad Minus Selects the previous marker

Side Objects

Ctrol + Drag Contrary to road objects, side object will instantly update when chyanging the shape of a spline object that only generates side objects. This can cause delays when complex side objects are involved. Pressing the Ctrl key while moving markers will only update the spline shape, the side objects will update after releasing the Ctrl key or mouse button.

 

Side Object Shape Editor Window

CTRL + Click Insert nodes
DEL Delete selected nodes


NOTE: The road network object must be selected in the hierarchy and the Scene View window must have focus for sahortcuts to work.

 

SCENE OPERATIONS

 

Deselect a connection prefab

Click on an empty area in the scene. All general road and connection handles will be activated

 

Join Two roads

select the outer markers that should connect by holding Shift and click the marker. When two markers of different road objects but of the same roads object type are selected, a button "Join Selected Roads" is displayed in the Inspector.